Documentation Errata - HP NetServer AA 4000 Release Note

• Debug tools that use drivers or have application code tied to hardware performance
counters may cause the HP NetServer AA Solution server to hang or crash. Generally, by
following these guidelines you can avoid problems associated with debug tools:
- Do not run user-level debug tools such as WinDbg and Softice on the CEs.
- Do not use kernel mode (remote) debugging because they are not supported on the
CEs.
- Do not run development tools such as VTUNE (a performance application) on the
CEs.

Documentation Errata

HP NetServer AA Solution documentation does not include a definition of the term "rail." Add
the following definition of this term to your Glossary.
Rail — A pair of NIC cards, one in each IOP, used by the CE operating system to create
one redundant network connection.
Note:The redundancy used in creating rails is not adapter teaming, which is not
supported on HP NetServer AA Solution servers.
Note the following corrections to your HP NetServer AA Solution documentation:
• In the HP NetServer AA Solution Administrator's
The description of Industry-standard hardware platform incorrectly states that HP
NetServer AA Solution supports Pentium II- and Pentium III-based system hardware. The
description should state that HP NetServer AA Solution supports only Pentium III-based
system hardware.
• In the HP NetServer AA Solution Administrator's
discussion about invoking the
misleading.
At the MS-DOS prompt, you cannot type the commands as described.
HP NetServer AA Solution commands are located in the folder
Files\Marathon Endurance
information about how to use the new ENDURANCE_APP_DATA environment variable to
compensate the default search path for ease in accessing commands and utilities.
• In the HP NetServer AA Solution Administrator's
IOPs, the instructions about using MTCFLASH to update the MICs need additional
clarification.
HP NetServer AA Solution Release Notes
Guide, there is an error in
Guide, on
mtcconfig -netinfo
.
Refer to Endurance_APP_DATA Environment Variable
Guide, in
page 177 and page
and commands is
mtceinfo
\Program
Installing the Adapters in the
Table 1-1.
192, the
for
17