HP NetServer AA 4000 Release Note page 19

• Do not use system BIOS features on CEs that require a local keyboard. Examples of these
features include screen blanking, power saving modes, and security modes, such as the use
of passwords or a security timer.
• Installation of the Release 3.0 or 3.0 Service Pack 1 Endurance System Manager software
is not supported on an HP NetServer AA Solution 4000 CE or IOP.
• When installing CE software from an offline IOP, it is possible that setup may fail, and the
following popup error message may be displayed:
determine what version of Windows NT the CE is using."
failure occurs immediately after the screen entitled
and directory."
If you encounter this error, do not continue with the installation. To correct the problem,
perform the following procedure to increase the amount of space allocated for the Windows
NT Registry in the IOP:
1. From the Task Bar, select
2. Select the Performance tab.
3. In the Virtual Memory section, click the
4. In the Registry Size section, set Maximum Registry Size to
value shown in the Current Registry Size section, whichever is larger.
5. Unload all CE registry hives, if any, that are loaded in the IOPs Registry, as
follows:
a. Run the Windows NT Registry editor program
1.) From the Task Bar, select
2.) Click OK.
b. In the window entitled
for the Registry key named
"HKEY_LOCAL_MACHINE"
c. If the key does exist, select it (by clicking on it). Then unload the related CE
Registry hive using the menu option
6. Reboot the IOP, and reinstall the HP NetServer AA Solution software.
HP NetServer AA Solution Release Notes
"Setup was unable to
"Select CE's Windows NT drive
Start Settings
Change...
Start Run.
"HKEY_LOCAL_MACHINE on Local Machine"
"SOFTWARE_HIVE"
. If the key does not exist, proceed to step step 6.
File
If it occurs, this
Control Panel System
button.
, or twice the
16 MB
.
REGEDT32.EXE
Type .
regedt32
under the root key
.
Unload Hive
.
check
15