HP Integrity Superdome 2 16-socket Release Note page 9

Launching HP SUM in online mode
1. Mount the ISO on your host.
2. Open Start.html, found in the root directory of the ISO, in a supported browser.
3. Follow the directory on the screen.
Offline mode: Runs HP SUM from the Linux kernel included in the ISO. Offline mode includes two
modes:
◦
Automatic mode: Firmware components are installed without your interaction. Automatic
mode will begin by default 30 seconds after you install a DVD or USB key with the ISO
burned on it.
NOTE:
mode. If you try to use interactive mode, you might experience performance issues.
◦
Interactive mode: Use the GUI to update components.
Initiating interactive mode
1. Open Start.html, found at the root of the ISO, in a supported browser.
2. Follow the instructions on the screen.
Migrating nodes from HP SUM 5.x to HP SUM 6.0.1
HP provides scripts that migrate the targets you added to HP SUM 5.x into nodes that HP SUM 6.0.1
recognizes. If you want to edit the targets that you migrate to HP SUM 6.0.1, use the /script
parameter. This generates a file that you can edit with a text editor application.
NOTE: The migration script does not support sudo credentials.
To migrate nodes to HP SUM 6.0.1:
1. Navigate to the directory that holds HP SUM.
2. Double-click port_targets.bat (Windows) or port_targets.sh (Linux).
You can also run the scripts from the command line.
Script syntax:
port_targets.bat [/y] [/h] [/script] [/user {username} /password {password}
The script supports the following options:
Option
/y
/h
/script
/user {username} /password {password}
Booting the HP SUM ISO from iLO virtual media is only supported in Automatic
Definition
Continue the migration without using prompts.
Print the script help.
This option creates a file with the migration commands, it
does not run the script. You can edit the script commands
manually before migrating the targets.
NOTE: Use this option to select the targets you migrate, or
edit the user credentials for an individual target.
This options sets a default username and password credentials
for each node that HP SUM migrates. If you do not use this
option, each node is given the following credentials:
user=username
password=passwd
Migrating nodes from HP SUM 5.x to HP SUM 6.0.1 9