HP Integrity Superdome 2 16-socket Release Note page 6

Table 1 HP SUM Windows network ports (continued)
Ports
Ports 21 or 63006–63010
Table 2 HP SUM Linux network ports
Ports
Port 22
Port 443
Port 62286
Ports 63001–63002
Ports 21 or 63006–63010
NOTE: HP SUM 6.x supports /port and /ssl_port options. This allows you to use ports other
than 63001 and 63005. Use these options to avoid conflicts with firewalls.
Special network configuration note for HP Integrity servers
HP Integrity servers have management network and production interfaces. These are usually kept on
separate subnets in an installation. To perform full remote administration of the server, access is required
for both networks. If you keep both networks isolated, you need to perform management and operating
systems tasks separately.
Enhancements
The following enhancements are included in this version of HP SUM:
Added a confirmation message on the Automatic Localhost Guided Update describing what
happens when you click Deploy.
Indicated required values on the Create Custom Baseline screen with a *.
Remove the Download from hp.com option from the Add Baseline screen. A future version of HP
SUM will include this function.
Added support for fully-qualified DNS names.
Added support for Red Hat Enterprise Linux 5.10.
Added support for VMware vSphere 5.5.
6 Enhancements
Description
iLO firmware without requiring a server reboot or a migration of the virtual
machines to other servers.
Remote HP Integrity iLO and Superdome 2 updates require these ports to be
open on systems for network traffic in both directions to transfer firmware files.
You can use these FTP ports to perform switch updates.
Description
Establishes a connection to a remote node via SSH to perform node inventory.
A secure data port used to transfer information.
Default for some internal communications. This port listens on the remote side if there
is no conflict. If a conflict occurs, the next available port is used.
Updates are passed to the node and retrieved through an internal secure web server
that uses the first available port in the range of 63001-63002. This support allows
iLO and VC firmware updates without having to access the host server. It also allows
servers running VMware or other virtualization platforms to update their iLO without
having to reboot their server or to migrate their virtual machines to other servers.
Remote HP Integrity iLO and Superdome 2 updates require these ports to be open on
systems for network traffic in both directions to transfer firmware files.
You can use these FTP ports to perform switch updates.