Cabinet Safety Precautions; Disposal Of Waste Equipment By Users In Private Households In The European Union; Hp Ups Battery Removal - HP Integrity BL860c Safety And Regulatory Information Manual

Cabinet Safety Precautions

WARNING!
whether equipment is installed in the cabinet or not. Avoid rolling cabinets on rough or uneven
surfaces or inclines greater than 10 degrees. Unloading cabinets from the pallet and movement
of cabinets should be performed by at least two people.
Slideable products are not to be extended from the cabinet while the equipment is on the shipping
pallet. The cabinet must be unloaded from the pallet and all anti-tip devices properly installed prior
to extending any slideable product.
Once installed, all anti-tip devices must remain in place to maintain stability. Only one slideable
product must be extended at a time.
To determine ballast requirements, refer to the ballast worksheets in documentation accompanying
the cabinet, or to information available at the following:
http://www.hp.com/go/rack_power
Failure to follow these precautions can result in damage to equipment or injury to personnel.

Disposal of waste equipment by users in private households in the European Union

This symbol on the product or on its packaging indicates that this product must not be disposed of
with your other household waste. Instead, it is your responsibility to dispose of your waste equipment
by handing it over to a designated collection point for the recycling of waste electrical and electronic
equipment. The separate collection and recycling of your waste equipment at the time of disposal
will help to conserve natural resources and ensure that it is recycled in a manner that protects
human health and the environment. For more information about where you can drop off your waste
equipment for recycling, please contact your local city office, your household waste disposal service
or the shop where you purchased the product. Also, see the following:
http://www.hp.com/hpinfo/globalcitizenship/environment/productdata/disassemblyservers.html

HP UPS battery removal

Important battery safety information
WARNING!
burns:
Do not attempt to recharge batteries after removal from the unit.
Do not disassemble, crush, or puncture the batteries.
Do not short the external contacts of the batteries.
Do not immerse the batteries in water.
Do not expose to temperatures higher than 60°C (140°F).
WARNING!
Remove watches, rings, or other metal objects.
Use tools with insulated handles.
Do not place tools or metal parts on top of batteries.
WARNING!
procedures when transporting a battery module. Battery modules weigh 20 kg (44 lb).
6 Safety and Regulatory Information
Cabinets are heavy even when empty. Exercise caution when moving cabinets
The unit contains sealed lead-acid battery modules. To prevent fire or chemical
To prevent personal injury from hazardous energy:
To prevent personal injury, prepare the area and observe all materials-handling