Show Status And Configuration Of Web-Based Authentication - HP 2600 Series Function Manual

Web and MAC Authentication for the Series 2600/2600-PWR and 2800 Switches

Show Status and Configuration of Web-Based Authentication

3-26
Show Status and Configuration of
Web-Based Authentication
Command
port-list
show port-access [
[clients]
[config]
[config [auth-server]]
[config [web-server]]
port-list
show port-access
Syntax: show port-access [port-list] web-based
Shows the status of all Web-Authentication enabled
ports or the specified ports. The number of authorized
and unauthorized clients is listed for each port, as well
as its current VLAN ID. Ports without Web Authenti-
cation enabled are not listed.
Syntax: show port-access [port-list] web-based [clients]]
Shows the port address, Web address, session status,
and elapsed session time for attached clients on all
ports or the specified ports. Ports with multiple clients
have an entry for each attached client. Ports without
any attached clients are not listed.
Syntax: show port-access [port-list] web-based [config]
Shows Web Authentication settings for all ports or the
specified ports, including the temporary DHCP base
address and mask. The authorized and unauthorized
VLAN IDs are shown. If the authorized or unauthor-
ized VLAN ID is 0 then no VLAN change is made, unless
the RADIUS server supplies one.
] web-based
web-based config detail
Page
3-26
3-26
3-26
3-27
3-27
3-27