Displaying 802.1X Configuration, Statistics, And Counters; Show Commands For Port-Access Authenticator - HP ProCurve Switch 6120G/XG Manual

Displaying 802.1X Configuration,
Statistics, and Counters
802.1X Authentication Commands
802.1X Supplicant Commands
802.1X Open VLAN Mode Commands
802.1X-Related Show Commands
show port-access authenticator
show port-access authenticator config
show port-access authenticator statistics
show port-access authenticator session-counters
show port-access authenticator vlan
show port-access authenticator clients
show port-access authenticator clients <port-list> detailed page 10-59
show port-access supplicant
Details of 802.1X Mode Status Listings
RADIUS server configuration

Show Commands for Port-Access Authenticator

Syntax: show port-access authenticator [port-list]
[config | statistics | session-counters | vlan | clients [detailed]]
If you enter the show port-access authenticator command with-
out an optional value, the following configuration informa-
tion is displayed for all switch ports, or specified ports, that
are enabled for 802.1X port-access authentication:
• Port -access authenticator activated: Are any switch ports
configured to operate as 802.1X authenticators using the
aaa port-access authenticator command? Yes or No
• Allow RADIUS-assigned dynamic (GVRP) VLANs: Are RADIUS-
assigned dynamic (GVRP-learned) VLANs supported for
authenticated and unauthenticated client sessions on the
switch? Yes or No
• Auth Clients: Number of authorized clients
• Unauth Clients: Number of unauthorized clients
Configuring Port-Based and User-Based Access Control (802.1X)

Displaying 802.1X Configuration, Statistics, and Counters

page 10-18
page 10-47
page 10-29
page 10-53
page 10-53
page 10-55
page 10-56
page 10-57
page 10-58
page 10-64
page 10-60
pages 10-25
10-51