Maintenance-Free Fan - IQAir HealthPro series User Manual

Chapter 7 – Maintenance
6.6 Replacing the HyperHEPA® Filter (Filter 3)
1. Open the locking arms, making sure
they are fully extended outward. For
details, refer to section 6.3.
4. Turn the frame upside down.
7. Dispose of the used filter by placing it
into the plastic bag in which the new
filter is supplied (see section 6.7).
6.7 Discarding Used Filters
Used filter elements can normally be put into the regular household trash for disposal. If the system may have been
exposed to potentially hazardous substances, the filters may have to be disposed of as hazardous waste. Please refer
to local regulations and laws for proper disposal.
Chapter 7 – Maintenance
7.1 Cleaning the Housing
•
Unplug the IQAir® system before attempting to clean it.
•
Use a soft and clean cloth for cleaning.
•
For water soluble stains, use a window cleaning fluid.
•
For the removal of tough, non water soluble stains, use a silicon spray.
•
Do not use any solvents or any organic cleaning fluids.

7.2 Maintenance-Free Fan

The IQAir® system is equipped with a maintenance-free fan motor.
22
Diffuser
Frame 3
2. Opening the arms will release the top
housing modules. Removing the diffu-
ser will reveal the HyperHEPA® filter
inside Frame 3.
5. With the palm of the hand, press down
on the filter and loosen the frame.
8. Turn the frame around and insert the
new filter. Ensure that the arrows on
the filter label point upward.
HyperHEPA
filter
Frame 3
3. Remove Frame 3 containing the
HyperHEPA® filter.
6. Lift the frame from the filter.
Frame 3
9. Put frame 3 back into the housing and
reposition the diffuser. For closing refer
to section 6.3.