Aux (Auxiliary) Mode For Cable Tv Box - Dish Network digital remote control User Manual

AUX (Auxiliary) Mode for Cable TV Box

Use these buttons to enter numbers in a menu.
AUX (A
UXILIARY
AUX M
To use the remote to operate a cable TV box, you must first set up the
remote to control the cable box. See Controlling a Device on page 15.
Then, you must press the AUX mode button to set the remote to AUX
mode. The AUX mode button's back light turns ON to show that the
remote is set to AUX mode. Make sure to keep the remote in AUX
mode to use the buttons as described in this section.
M
Press this button to turn off the sound. Press it again to restore
the sound.
Press the left-hand, minus (-) side of this button to lower the sound
volume. Press the right-hand, plus (+) side of this button to raise
the sound volume.
12
N B
UMBER
) M
ODE FOR
Some of the features described below may not
apply to the cable TV box. See your cable box
owner's manual for details about the box's features.
If a remote control button is not described in this
section, it does not work for a cable TV box.
B
ODE
B
UTE UTTON
V
OLUME
UTTONS
C
ABLE
UTTON
B
UTTON
TV B
OX
104333