Tv (Television) Mode - Dish Network digital remote control User Manual

TV (Television) Mode

• When watching a program or with the Program Guide open,
use these buttons to enter a channel number to change to that
channel.
• When the Program Guide is open, enter a number of hours
using these buttons, and then press the Right or Left arrow
button to skip the display backward or forward by that number
of hours.
• Use these buttons to enter menu option numbers. For an option
that has a number, you may do this instead of highlighting the
option and then pressing the Select button.
• Use these buttons to enter numbers in a menu. To do this,
first highlight the place where you need to enter the number.
Next, press a number button (or, you can use the Up/Down
arrow buttons to enter the number). Then, move the highlight
to the place for the next number that you need to enter, or press
the Select button if you are done entering numbers.
P
OUND
Use this button in Changing the Remote Control Address on pag e16.
TV (T
ELEVISION
8
N B
UMBER
B
UTTON
) M
ODE
Some of the features described below may not
apply to the TV. See your TV owner's manual
for details about the TV's features. If a remote
control button is not described in this section, it
does not work in TV mode.
UTTONS
104333