Test Run - Grizzly G2790 Owner's Manual

test Run

once you have mounted the grinder to the work-
bench, test run your machine to make sure it runs
properly.
if, during the test run, you cannot easily locate
the source of an unusual noise or vibration, stop
using the machine immediately, then review the
troubleshooting on page 25.
if you still cannot remedy a problem, contact our
tech support at (570) 546-9663 for assistance.
-14-
to test run the machine:
1. make sure you have read the safety instruc-
tions at the beginning of the manual and that
the machine is setup properly.
2. make sure all tools and objects used during
setup are cleared away from the machine.
3. Connect the machine to the power source,
then turn it ON.
4. listen to and watch for abnormal noises or
actions. the machine should run smoothly
with little or no vibration or rubbing noises.
— strange or unusual noises should be inves-
tigated and corrected before operating the
machine further. always disconnect the
machine from power when investigating or
correcting potential problems.
5. turn the machine OFF.
g2790 universal Knife grinder