Burner Grates; Burner Head And Cap Replacement - GE JGP328 Owner's Manual

Burner cap properly seated
Burner cap not properly seated
JGP940 and JGP970 (all burners)
JGP933 and JGP963
(right front burner only)
Burner cap
Burner head
Locator
pins
Pin
indentations
Make sure the pins in the burner heads match
the burner base indentations and that they are
properly seated in them by rotating the heads
until they are level.
(On some models)
"OUTSIDE" "INSIDE" "OUTSIDE"
edge edges edge
(On some models)
"INSIDE"
edges
"OUTSIDE"
edge
Tabs

Burner Head and Cap Replacement

Replace the burner head onto the
burner base, making sure that the head is
properly oriented over the burner base
and the electrode. Make sure to place the
correct burner head on the correct
burner base and that the burner head sits
level on the burner base. The burner
heads are not interchangeable.
JGP328, JGP330, JGP628, JGP630,
JGP933, JGP945, JGP963, JGP975
Stability
chamber
Electrode
Burner
base
Make sure the slot in the burner head is positioned
over the electrode. The burner cap has three
to four pins. When replacing the cap, make sure
none of the pins sits in the stability chamber.

Burner Grates

Your cooktop has professional style
grates. These grates are designed for
specific positions. These grates should
only be used in their proper positions;
they should not be interchanged. For
your convenience, the undersides of
the left and right grates are marked
"OUTSIDE" and "INSIDE". Make sure
that the sides marked "OUTSIDE" are
facing the outer edge of the cooktop and
the sides marked "INSIDE" are
facing each other. All grates
should touch once they are
fully assembled on the
cooktop surface.
For cooktops with three grates,
make sure that the tabs on
"OUTSIDE"
either side of the center grate
edge
fit into the slots located on the
"INSIDE" edge of the side
grates.
Burner cap
Burner head
Electrode
Burner base
GEAppliances.com
Replace the burner cap onto the burner
head, making sure to place the correct
burner cap on the correct burner head.
The burner caps are not interchangeable.
Also, make sure that the burner caps are
properly seated on the burner heads.
JGP945 and JGP975
(right front burner only)
Burner cap
Burner head
assembly
Electrode
Make sure the hole in the burner head assembly
is positioned over the electrode and that the burner
head is fully inserted inside the burner base. A
small gap between the base and head is normal.
Lift the burner grates out only when
cool. Grates should be washed regularly
and, of course, after spillovers. Wash
them in the dishwasher or in hot, soapy
water and rinse with clean water. When
replacing the grates, be sure they are
positioned securely over the burners.
Although they are durable, the grates will
gradually lose their shine, regardless of
the best care you can give them. This is
due to their continual exposure to high
temperatures. You will notice this sooner
with lighter color grates.
Do not operate a burner for an extended
period of time without cookware on the
grate. The finish on the grate may chip
without cookware to absorb the heat.
NOTE: Do not clean the grates in a
self-cleaning oven.
Orifice
Burner
base
11