Burner Grates - GE monogram ZGU36K Owner's Manual

Care and Cleaning
Gas Cooktop
Burner
grates
Cast-iron burner grates should be washed
regularly and especially after spillovers.
The grates can be cleaned in a dishwasher or
wash them in hot, soapy water and rinse with
clean water. You may also use abrasive cleaners
and steel wool pads to clean the burner grates.
Dry
the grates with a cloth-do
not
place them
on the cooktop when wet.
Although they are durable, the grates will
gradually lose their shine, regardless of the
best care you can give them. This is due to their
continual exposure to high temperatures.
Do not operate a burner for an extended
period of time without cookware on the
grate. The finish on the grate may chip without
cookware to absorb the heat.
After cleaning, replace the center grate first with
its locking side tabs toward the front. Replace the
side grates so that their side edges lock over the
tabs on the center grate. Make sure the grates
are positioned securely over the burners and
that they are stable and level.
Rubber Grate Feet
For stability, your cooktop has rubber feet on
the burner grates. If any of these rubber feet
should become damaged or lost, replace them
immediately.
To order replacement rubber grate feet, please
call our toll-free number:
National Parts Center ............. 800.626.2002
Rubber Grote Feet ............... #WBO2T10101
16