Time Alarm - La Crosse Technology WS-9035TWC Instruction Manual

47-54
9
mph
55-63
10
mph
64-72
11
mph
73+
12
mph
IX. TIME ALARM
To set the time alarm:
1. Press and hold the ALM/+ button for 5 seconds.
2. The alarm time will begin to flash in the DATE LCD.
3. Press and release the IN/HR button to adjust the hour.
Note: When in the 12-hour mode and setting an alarm for a time between noon and midnight, "PM" will appear to
the left of the alarm time in the DATE LCD.
4. Press and release the OUT/MIN button to adjust the minutes.
5. Press and release the WIND/SNZ button to confirm the setting or wait for 20 seconds and the display will
automatically return to the normal mode.
To activate the alarm:
1. Press and release the ALM/+ button to toggle between the alarm
time and the day and date.
2. When the alarm time and alarm icon are showing in the DATE
LCD the alarm is activated.
3. When the day and date are showing in the DATE LCD the alarm
is deactivated.
To activate the snooze:
1. While the alarm is sounding press and release the WIND/SNZ button.
2. The snooze will be activated and the alarm will come back on after the selected time period.
75-88 41-47
kph knots
89-102 48-55
kph knots
103-117 56-63
kph knots
118+ 64+
kph knots
14
Slight damage occurs
to buildings, shingles
are blown off of roofs.
Strong Gale High waves (6 meters),
rolling seas, dense
foam, Blowing spray
reduces visibility.
Trees are broken or
uprooted, building
damage is
considerable.
Large waves (6-9
Whole Gale or Storm
meters), overhanging
crests, sea becomes
white with foam, heavy
rolling, reduced
visibility.
Extensive widespread
damage.
Large waves (9-14
Violent Storm
meters), white foam,
visibility further
reduced.
Extreme destruction,
devastation.
Large waves over 14
Hurricane meters, air filled with
foam, sea white with
foam and driving spray,
little visibility.