Table of Contents
Advertisement
• From normal time display, press and release the TIME SET button to search for the WWVB time signal.
• Please be sure you have selected your time zone from the list in the Settings menu. When the Atomic time
signal is received, the station will set to the time zone selected. Default is Eastern Time.
• For information about WWVB visit:
• When operating with the power cable, the backlight is adjustable: HI-LOW-OFF.
• Press and release SNOOZE/LIGHT to adjust backlight.
• When operating on batteries only, the backlight will come on briefly when the SNOOZE/LIGHT button
is pressed.
The alarm will be active when alarm time is set.
1. Hold the ALARM button for 3 seconds to enter alarm settings.
2. The HOUR will show.
3. Press the ARROW buttons to adjust.
4. Press ALARM to confirm and move to the minutes
5. The MINUTES will show.
6. Press the ARROW buttons to adjust.
7. Press ALARM to confirm and exit settings.
• The alarm is active when set.
• Press and release the ALARM button to view alarm time. Then press and release the ALARM button to
deactivate or activate the alarm.
• The alarm icon (bell) will show when active.
• When the alarm sounds, press the SNOOZE/LIGHT button to silence the alarm for 10 minutes.
• The snooze icon Zz will flash.
• Press any button except SNOOZE/LIGHT to silence the alarm for 24 hours.
Wireless Color Weather Station
WWVB Atomic Time
http://bit.ly/AtomicTime
Backlight (HI-LOW-OFF)
Alarm Time
Deactivate/Activate Alarm
Snooze
Page | 6
Advertisement
Table of Contents
