Adjusting Home Positions; To Adjust Home Positions; To Turn The Button Operation Tone On And Off; To Recover From The Sleep State - Casio 5200 Operation Manual

Table of Contents

Advertisement

Operation Guide 5200
Recovery Times
The table below shows the amount exposure that is required to take the battery from
one level to the next.
Exposure Level
Approximate Exposure Time
(Brightness)
Level 5
Level 4
Outdoor Sunlight
2 hours
(50,000 lux)
Sunlight Through a
6 hours
Window (10,000 lux)
Daylight Through a
8 hours
Window on a Cloudy
Day (5,000 lux)
Indoor Fluorescent
94 hours
Lighting (500 lux)
• The above exposure time values are all for reference only. Actual required exposure
times depend on lighting conditions.

To adjust home positions

ADJ
l
C
Correct second hand
position

To turn the button operation tone on and off

B
C
A

To recover from the sleep state

Auto Return
Level 3
Level 2
Level 1
18 hours
5 hours
67 hours
18 hours
108 hours
29 hours
- - - - - - - -
- - - - - - - -
A
H-SET
H-SET
SEC 00
C
A
A
ADJ
12H
24H

Adjusting Home Positions

C
B
l
■ If the hands point to 12 o'clock
■ If the hands point to the left of 12 o'clock
Correct hour and
C
minute hand positions
■ If the hands point to the right of 12 o'clock
B

Reference

Button Operation Tone
Power Saving Function
Elapsed Time
Display
in Dark
Scrolling
The C button is used in various modes and setting screens to scroll through data on
the display. In most cases, holding down this button during a scroll operation scrolls at
high speed.
Initial Screens
When you enter the World Time Mode or Alarm Mode, the data you were viewing
when you last exited the mode appears first.
Timekeeping
• Resetting the seconds to 00 while the current count is in the range of 30 to 59
causes the minutes to be increased by 1. In the range of 00 to 29, the seconds are
reset to 00 without changing the minutes.
• The year can be set in the range of 2000 to 2099.
• The watch's built-in full automatic calendar makes allowances for different month
lengths and leap years. Once you set the date, there should be no reason to change
it except after you have the watch's battery replaced.
C
+0:00
C
C
–0:00
C
Operation

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 5200 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Table of Contents

Save PDF