Casio Watch Operation Manual

© 2013 CASIO COMPUTER CO., LTD.
MA1301-EA
Operation Guide ANALOG(MAJ)
• Your watch may differ somewhat from the one shown in the illustration.
Notes
• Some water resistant models are equipped with a screw lock
crown.
• With such models, you must unscrew the crown in the direction
noted in the illustration to loosen it before you can pull it out.
Do not pull too forcibly on such crowns.
• Also note that such watches are not water resistant while their
crowns are loosened. Be sure to screw the crowns back in as
far as they will go after making any setting.
[Modules 5284, 5361, and 5364]
To set the time
1. When the second hand is at 12 o'clock, pull out the
crown to stop it.
2. Set the hands by rotating the crown. Move the
minute hand four or five minutes past the setting
you want, and then back them up to the setting.
3. Push the crown back in on a time signal to resume
timekeeping.
[Modules 5128, 5180, 5199, 5206, 5207, 5218, 5250, 5340, 5341, 5342, 5343, 5352, and
5358]
To set the time
1. When the second hand is at 12 o'clock, pull out the
crown to the second click to stop it.
2. Set the hands by rotating the crown. Move the
minute hand four or five minutes past the setting
you want, and then back them up to the setting.
3. Push the crown back in on a time signal to resume
timekeeping.
To set the day
• Avoid setting the day between 9:00 p.m. and 1:00
a.m. The day may not change in the following day
if you do.
1. Pull out the crown to the first click.
2. Set the day by rotating the crown.
3. Push the crown back in to its normal position.
[Modules 5125, 5167, 5223, 5237, 5249, and 5339]
To set the time
1. When the second hand is at 12 o'clock, pull out
the crown to the second click to stop it.
2. Set the hands by rotating the crown. Move the
minute hand four or five minutes past the setting
you want, and then back them up to the setting.
3. Push the crown back in on a time signal to resume
timekeeping.
To set the day and day of the week
• Avoid setting the day and day of the week between
9:00 p.m. and 5:00 a.m. The day and day of the
week may not change in the following day if you do.
1. Pull out the crown to the first click.
2. Set the day by rotating the crown counterclockwise.
3. Set the day of the week by rotating the crown clockwise.
4. Push the crown back in to its normal position.
• For watch with the elapsed time bezel
Rotate the elapsed time bezel to align the
minute hand.
After certain amount of time elapsed, read the graduation on the
elapsed time bezel which the minute hand points to.
The elapsed time is indicated.
Accuracy at normal
Module No.
5125/5128/5206/
5207/5237/5249/
5361
5167
5180/5199/5223/
5342/5343/5358
5218/5250
5284/5364
5339/5340/5341
5352
[Module 5364]
Low Battery Indicator: S econd hand moves in 2-second increments when power is low.
Crown
First click (Day setting)
Crown
(Normal position)
First click
(Day, day of week setting)
Crown
(Normal position)
mark with the

Specifications

temperature Battery type
(per month)
±20 seconds SR626SW
±20 seconds SR920SW
±20 seconds SR621SW
±20 seconds SR616SW
±20 seconds SR521SW
±20 seconds SR920SW
±20 seconds SR716SW
Second click
(Time setting)
Second click
(Time setting)
Elapsed time bezel
Battery life
Approx. 3 years
Approx. 5 years
Approx. 3 years
Approx. 2 years
Approx. 2 years
Approx. 3 years
Approx. 3 years
1