4. Gently press the battery into the battery bay until the latch clicks into place.
Power-up modes
The computer has three power-up modes:
Hibernation (saves data in memory to the hard disk)
Standby (Power remains on, saving data in RAM, but the CPU and all other
devices enter sleep mode.)
Boot (does not save data in memory)
NOTE: Refer also to the section Turning off the power in Chapter 3,
Getting Started.
Panel power off/on
You can set up your computer so that power turns off automatically when you
close the display panel.
When you open the panel, power turns on in Standby or Hibernation mode but not
in boot mode.
NOTE: If the panel power off function is enabled and you use Shut down
Windows, do not close the display until the shut down function is
completed.
Battery
Figure 6-2 Installing the battery pack
Power-up modes
6-14