Toshiba Satellite P10 series User Manual page 45

Parallel Port This Centronics-compatible 25-pin parallel port is used
NOTE: If ECP functionality is required, you need to enable ECP in the
BIOS setup menu.
External
Monitor Port
TV Out Plug a 4-pin S- video cable into this connector to
DC IN 19 V Jack The DC-IN socket is where you plug in the AC adapter.
Fan Vents The fan vents expel hot air out of the computer in order
to connect a parallel printer or other parallel device.
This port supports the Extended Capabilities Port
(ECP) standard.
This 15-pin port lets you connect an external video
display to the computer.
output the video signal to either an NTSC or PAL
compatible television.
to keep the CPU and other parts cool. Do not block or
otherwise cover.
Back side
2-6