Toshiba Satellite P10 series User Manual page 142

Hide thumbs Also See for Satellite P10 series:
Table of Contents

Advertisement

Battery
If you suspect a problem with the battery, check the DC IN indicator as well as
the indicators for the battery. For information on indicators and battery operation
see Chapter 6, Power and Power-Up Modes.
Problem
Battery doesn't power
the computer
Battery doesn't charge
when the AC power
cord is attached
(Battery indicator
does not glow amber)
Battery doesn't power
the computer as long
as expected
Hardware and system checklist
Procedure
The battery may be discharged. Connect the AC
power cord to charge the battery.
If the battery is completely discharged, it will not
begin charging at once. Wait a few minutes.
If the battery still does not charge, make sure the
outlet is supplying power. Plug in an appliance and
see if it works. If it doesn't, try another power source.
Check whether the battery is hot or cold. If the battery
is too hot or too cold, it will not charge properly. Let
it reach room temperature.
Unplug the AC adaptor and remove the battery to
make sure the terminals are clean. If necessary wipe
them with a soft dry cloth dipped in alcohol.
Connect the AC adaptor and replace the battery.
Check the Battery indicator. If it does not glow, let
the computer charge the battery for at least 20
minutes. If the Battery indicator glows after 20
minutes, let the battery continue to charge for at least
another 20 minutes before turning on the computer.
If the indicator still does not glow, the battery may be
at the end of its operating life.
Replace it.
If you do not think the battery is at the end of its
operating life, see your dealer.
Check the power consumption settings in the
TOSHIBA Power Management Utility. Consider
using a power saving mode.
8-6

Advertisement

Table of Contents
loading

Table of Contents