Toshiba Satellite P10 series User Manual page 37

Low Battery
Automatic Hibernation
Hibernation This feature lets you turn off the power without exiting
Standby In Standby mode, power to the system remains on, but
CAUTIONS:
When battery power is exhausted to the point that
computer operation cannot be continued, the system
automatically enters Hibernation and shuts down. You
can specify the setting in the TOSHIBA Power
Management Utility.
from your software. The contents of main memory is
saved to the hard disk, when you turn on the power
again, you can continue working right where you left
off. Refer to the Turning off the power section in
Chapter 3, Getting
the CPU and all other devices are in sleep mode. When
the computer is in standby mode, the Power LED
flashes in amber. The computer enters Standby mode
regardless of the Hibernate setting. Refer to the Turning
off the power section in Chapter 3,
details.
1. Before entering Standby mode, be sure to save
your data.
2. Do not install or remove a memory module while
the computer is in Standby mode. The computer
or the module could be damaged.
3. Do not remove the battery pack while the
computer is in Standby mode. Data in memory
will be lost.
Special features
Started, for details.
Getting Started, for
1-11