Problem
Some CD run
correctly, but others
do not
Cannot write
correctly
Hardware and system checklist
Procedure
The software or hardware configuration may be
causing a problem. Make sure the hardware
configuration matches your software's needs. Check
the CD/DVD's documentation.
Check the type of CD/DVD you are using. The drive
supports:
DVD-ROM: DVD-ROM, DVD-Video, DVD-R,
DVD-RW, DVD+R, DVD+RW, DVD-
RAM
CD-ROM:
CD-DA, CD-Text, Photo CD (single/
multi-session), CD-ROM Mode 1,
Mode 2, CD-ROM XA Mode 2
(Form1, Form2), Enhanced CD
(CD-EXTRA), CD-G (Audio CD
only), Addressing Method 2
Check the region code on the DVD. It must match
that on the DVD±RW drive. Region codes are listed
in the Optical media section in Chapter 2, The Grand
Tour.
If you have trouble writing, make sure you are
observing the following precautions:
•
Use only media recommended by TOSHIBA.
•
Do not use the mouse or keyboard during writing.
•
Use only the software supplied with the computer
for recording.
•
Do not run or start other software during writing.
•
Do not jar the computer during writing.
•
Do not connect/ disconnect external devices or
install/remove internal cards during writing.
If problems persist, contact your dealer.
8-18