Toshiba M500 User Manual page 50

n D o not connect any cable other than a LAN cable to the LAN jack. It could
cause damage or malfunction.
n D o not connect the LAN cable to a power supply. It could cause damage
or malfunction.
2-6
Universal Serial Bus (USB 2.0) ports
5
Two Universal Serial Bus (USB) ports comply with USB 2.0
standards, which enables data transfer speeds 40 times faster than
the USB 1.1 standards.
LAN Jack
6
This jack lets you connect to a LAN. The adaptor has built-in
support for Ethernet LAN (10 megabits per second, 10BASE-T),
Fast Ethernet LAN (100 megabits per second, 100BASE-TX) and
Gigabit Ethernet LAN (1000 megabits per second, 1000BASE-T).
The LAN has two indicators. Refer to Chapter 4,
for details.
Modem Jack
7
The modem jack allows you to use a modular cable to connect the
modem directly to a telephone line. (Depends on the model you
purchased.)
n C onnection to any communication line other than an analog
phone could cause a computer system failure.
n C onnect the built-in modem only to ordinary analog
phone lines.
n Never connect the built-in modem to a digital line (ISDN).
n N ever ever connect the built-in modem to the digital
connector on a public telephone or to a digital private
branch exchange (PBX).
n N ever connect the built-in modem to a key telephone
system for residences or offices.
A void using your computer modem with the telephone cable
n
connected during an electrical storm. There may be a remote
risk of electric shock from lightning.
(Provided with some models)
Operating Basics,
User 's Manual