Toshiba M500 User Manual page 176

Troubleshooting
U SB
Also refer to your USB device's documentation.
Problem
USB device does not
work
U SB mo u s e
Problem
On-screen pointer
does not respond to
mouse operation
Double-clicking does
not work
The mouse pointer
moves too fast or too
slow
The mouse pointer
moves erratically
9-14
Procedure
Check for a firm cable connection between the
USB ports on the computer and the USB device.
Make sure the USB device drivers are
properly installed. Refer to your Windows
documentation for information on checking the
drivers.
If problems persist, contact your dealer.
Procedure
The system might be busy. If the pointer is
shaped as an hourglass, wait for it to resume its
normal shape and try again to move it.
Make sure the mouse is properly connected to the
USB port.
Try changing the double-click speed setting in the
mouse control utility.
1. To access this utility, click
Panel Hardware and Sound
(under Devices and Printers).
2. Within the Mouse Properties window, click the
Buttons tab.
3. Set the double-click speed as required and
click OK.
Try changing the speed setting in the mouse
control utility.
1. To access this utility, click
Panel Hardware and Sound
(under Devices and Printers).
2. Within the Mouse Properties window, click the
Pointer Options tab.
3. Set the pointer speed as required and click OK.
The mouse might be dirty. Refer to your mouse
documentation for instructions on cleaning.
If problems persist, contact your dealer.
7
®
Control
Mouse
Control
Mouse
User 's Manual