Toshiba M500 User Manual page 173

Problem
Some CD/DVDs run
correctly, but others do
not.
Cannot write correctly
User 's Manual
Procedure
The software or hardware configuration may
be causing a problem. Make sure the hardware
configuration matches your software's needs. Check
the CD/DVD documentation.
Check the type of CD/DVD you are using. The drive
supports:
DVD-ROM: DVD-ROM, DVD-Video
CD-ROM: CD-DA, CD-Text, Photo CD (single/
multi-session), CD-ROM Mode
1, Mode 2, CD-ROM XA Mode 2
(Form1, Form2), Enhanced CD (CD-
EXTRA), Addressing Method 2
n DVD Super Multi drive Double Layer
Recordable DVD-R/-R DL, DVD+R/+R DL, DVD-
DVD: RW, DVD+RW, DVD-RAM
Check the region code on the DVD. It must match
that on the DVD Super Multi Double Layer drive.
Region codes are listed in the
section in Chapter 2, The Grand
If you have trouble writing, make sure you are
observing the following precautions:
Use only media recommended by TOSHIBA Do not
use the mouse or keyboard during writing.
Use only the software supplied with the computer for
recording.
Do not run or start other software during writing.
Do not jar the computer during writing.
Do not connect/disconnect external devices or install/
remove internal cards during writing. If problems
persist, contact your dealer.
Troubleshooting
Optical Disc Drive
Tour.
9-11