HTC TOUCH Diamond2 User Manual page 179

• Metering Mode. Select a metering mode to allow the camera to measure the
amount of light and calculate the best-fit exposure value before capturing.
• Prefix. The file name of a newly captured photo or video is set to "IMAGE" or
"VIDEO" followed by a sequential number, for example: IMAGE_001.jpg. You
can also choose the current date or date and time as the file name prefix.
Note You can not change the file name prefix when saving captured photos to a
storage card. Captured photos are named using the convention IMAGnnnn.jpg
(where 'nnnn' is the counter), and are saved to the \DCIM\100MEDIA folder on
the storage card.
• Counter. Reset the file naming counter back to 1.
• Flicker Adjustment. When taking indoor shots under fluorescent lighting,
keep this setting on Auto or change it to the proper frequency (50Hz or 60Hz)
of the power in your country to reduce flicker.
• Grid (Photo mode). Show a grid on the screen so you can easily frame and
center your subjects.
• Record with Audio (Video or MMS Video mode). Select On to record videos
with audio, or Off to record videos without audio.
• Recording Limit (Video mode). Set the maximum duration or file size for
recording video.
• Template (Picture Theme mode). Select a template.
• Template Folder (Picture Theme mode). By default, templates are stored in
the \My Documents\Templates folder on the device's Main Memory. If you
transferred some templates to a storage card, set this option to Main + Card.
• Show Reminder (Contacts Picture mode). Select On if you want the Camera
to prompt you to assign the captured picture to a contact.
• Direction (Panorama mode). Choose the direction in which to stitch the
photos in a panorama.
• Stitch Count (Panorama mode). Select the number of shots to take and stitch
into a panorama.
Experiencing Multimedia 179