Performing A Hard Reset - HTC TOUCH Diamond2 User Manual

18 Managing Your Device

Performing a hard reset

If a normal reset does not solve a system problem, you can perform a hard (full)
reset. After a hard reset, the device is restored to its default settings—the way it
was when you first purchased it and turned it on. You will lose any programs you
installed, data you entered, and settings you customized on your device, and only
Windows Mobile® software and other pre-installed programs will remain.
Warning!
Important If Encrypt files when placed on a storage card is enabled, backup all files from
To perform a hard reset
1.
With the device turned off, press and hold the VOLUME UP and VOLUME
DOWN buttons, then briefly press the POWER button.
2.
Continue pressing the VOLUME UP and VOLUME DOWN buttons until you see
this message on the screen:
3. Release the VOLUME UP and VOLUME DOWN buttons.
4.
Press the VOLUME UP button to perform the hard reset, or press any other
button to cancel the reset.
Your device will be set back to factory default settings. Make sure that any
additional installed programs and/or user data have been backed up before you
perform a hard reset.
the storage card before using Clear Storage, hard reset, or updating the operating
system. Otherwise you will no longer be able to access the encrypted files on the
storage card. Use ActiveSync or Windows Mobile Device Center to transfer files
between your storage card and computer. After the procedure, copy your files
back to the storage card.
This operation will delete
all your personal data,
and reset all settings
to manufacturer default.
Press VolUp to restore
manufacturer default, or
press other keys to cancel.