Beaming Information Using Bluetooth - HTC TOUCH Diamond2 User Manual

16 Bluetooth
4.
Tap the name of the Bluetooth headset in the list to automatically pair it with
your device.
Note
If the Bluetooth stereo headset is disconnected, turn the stereo headset on, repeat
steps 1 and , and then tap the stereo headset name under the Previously Paired
Headsets section to connect.

9.4 Beaming Information Using Bluetooth

You can beam information such as contacts, calendar items, tasks, and files from
your device to a Bluetooth-enabled computer or device.
To beam information from your device to a computer
1.
Turn on Bluetooth on your device, and make your device visible. For
information about this, see "To turn Bluetooth on and make your device visible".
2.
Set Bluetooth on your computer to visible mode, create a Bluetooth
partnership, then enable your computer to receive Bluetooth beams.
Note
If your computer has Windows Vista or Windows XP SP2 and your computer's
Bluetooth adapter is supported by your Windows version, do the following:
a. On your computer, open Bluetooth Devices from the Control Panel, and
b. For Windows Vista, select Allow Bluetooth devices to find this
If automatic pairing fails, enter the headset passcode manually when prompted.
If the Bluetooth adapter or dongle on your computer was installed using a third-
party driver, open the Bluetooth software that came with the Bluetooth adapter/
dongle and enable the adapter/dongle to be discovered by other devices. Refer
to the Bluetooth adapter's documentation for more information.
then click the Options tab on the Bluetooth Devices window.
computer.
For Windows XP, select Turn discovery on and Allow Bluetooth devices
to connect to this computer.