Installing The Sim Card, Battery, And Storage Card; Sim Card - HTC TOUCH Diamond2 User Manual

1.2 Installing the SIM Card, Battery, and Storage Card

You need to remove the back cover before you can install the SIM card, battery,
and storage card. Also, make sure to always turn off the power before installing or
replacing the SIM card and battery.
To remove the back cover
1.
Make sure your device is turned off.
2.
Firmly hold the device with both
hands and the front panel facing
down.
3. Push the back cover up with your
thumbs until it disengages from the
device and then slide it up to remove.

SIM card

The SIM card contains your phone number, service details, and phonebook/
message memory. Your device supports both 1.8V and V SIM cards.
Note
Some legacy SIM cards may not function with your device. You should consult with
your service provider for a replacement SIM card. There may be fees for this service.
To install the SIM card
1. Remove the battery if it is installed.
2.
Locate the SIM card slot, then insert
the SIM card with its gold contacts
facing down and its cut-off corner
facing out the card slot.
3.
Slide the SIM card completely into
the slot.
Cut-off
corner
Getting Started 5