6.14.4 BATT Key
Pressing the BATT key during normal AC Input mode of operation displays battery capacity
information. The following system message is displayed:
If an AC input power failure occurs and no abnormal operating conditions are present, the
UPS switches to the Battery Backup mode. The following system message is displayed when
the BATT key is pressed:
6.14.5 MENU, F1, ENTER, UP/DOWN Keys
Press the MENU key during normal AC Input Mode of operation to access the menu of user
adjustable data screens. Press the Up/Down arrow keys to scroll through the available data
screens. Pressing the F1 key changes to the adjustment screen for that menu item. Press the
Up/Down arrow keys to move the display to the next.
From the adjustment screen, if the MENU key is pressed any changes are discarded and the
display returns to the regular menu screen with the previous data values shown. If the
ENTER key is pressed from the adjustment screen, the changes are saved. After pressing
ENTER, the display screen will return to the regular menu screen with the new data values
shown (see Section 6.15 Menu Data Screens).
6.14.6 BATT TEST Key
Pressing the BATT TEST key during normal AC Input mode of operation displays battery
back-up information. The following system message is displayed:
Press the F1+ ENTER keys at the same time to begin the battery test. The following system
message is displayed:
44
- UPS ON-LINE -
BATTERY VOLTAGE= 324V
CHARGE CURR.=0%
- BATTERY BACKUP -
BATTERY VOLTAGE= 324V
DISCHARGE CURR.=76%
- BATTERY TEST -
BATTERY VOLTAGE= 324V
> F1+ENTER TO BEGIN
- BATTERY TEST -
BATTERY VOLTAGE= 324V
## MINS ## SECS
> PLEASE WAIT
4200FA XT 80kVA Installation and Operation Manual
Note: Discharge current in Line-3 is 0%
unless unit is in the battery mode.
Note: Line-4 is left blank.
Note: Line-4 is left blank.