Step 3-3: Heat Sink Installation; Step 3-4: Memory Installation - Gigabyte GS-SR147S System Installation Manual

Hardw are Installation Process

Step 3-3: Heat Sink Installation

Step 1 Put the Heat Sink on the CPU. Before putting the heat sink on the CPU, please well remember
to apply the thermal conductivity compound on the CPU.
Step 2 Then, Seat the heat sink in the retention modules with the four screws. Installation completed.
Step 1
Step 2

Step 3-4: Memory Installation

Step 1 The DIMM slot has a notch, the DIMM memory module only fit in one direction.
Step 2 Align the memory notch to the module and push the memory into the DIMM socket vertically.
Step 2
Notch
13