Using The Button - Epson NPD4908-00 EN User Manual

User's Guide

Using the button

Note:
Depending on the product, the scanning function may not be available when using the button.
❏ Check if you have assigned a program to the button.
"Epson Event Manager" on page 85
&
❏ Make sure Epson Scan and Epson Event Manager are installed correctly.
❏ If you have clicked the Keep Blocking button in the Windows Security Alert window during or after installation of
the Epson Software, unblock Epson Event Manager.
"How to unblock Epson Event Manager" on page 149
&
How to unblock Epson Event Manager
A
Click Start or the start button, and then point to Control Panel.
For Windows 8:
Select Desktop, Settings charm, and Control Panel.
B
Do one of the following.
❏ Windows 8 and Windows 7:
Select System and Security.
❏ Windows Vista:
Select Security.
❏ Windows XP:
Select Security Center.
C
Do one of the following.
❏ Windows 8, Windows 7 and Windows Vista:
Select Allow a program through Windows Firewall.
❏ Windows XP:
Select Windows Firewall.
D
Do one of the following.
❏ Windows 8 and Windows 7:
Confirm that the check box for EEventManager Application is selected in the Allowed programs and
features list.
❏ Windows Vista:
Click the Exceptions tab, and then confirm that the check box for EEventManager Application is selected
in the Program or port list.
Troubleshooting for Scanning
149