Iii-8-3. Dhcp Server - Edimax EW-7416APn v2 User Manual

Click "APPLY" to save changes. The following message will appear:
Click "CONTINUE" to save the changes and continue configuring other settings,
or click "APPLY" to restart the system and make the changes take effect.
III-8-3. DHCP Server
The access point can be configured to act as a DHCP server for your network.
By default DHCP is disabled. Enable DHCP by selecting "Enable" in the field
"DHCP Server" of "Management IP" as detailed in the previous section.
DHCP Server
Default Gateway IP
not be able to connect to the browser-based
configuration interface in the future.
Note: To reset the IP address back to its
default value of 192.168.2.1, press and hold
the WPS/Reset button on the access point for
10 seconds. Be aware that doing so restores
all settings and passwords back to factory
defaults.
Specify the IP address of the default gateway of your
network here.
53