II-2-2.
AP Client Mode
1. Select AP Client Mode and click "Next".
2. You will have the option to
change the password used to
access the device's configuration
settings. For first time setup,
please simply click "Next"
without changing anything.
3. The device will search for nearby wireless networks to connect to. If you
cannot find the access point you
wish to connect to, click "Scan" to
refresh the list of wireless networks.
Select the wireless network you wish
to connect to, and click "Next" to
continue.
4. If the wireless network you selected
requires a network security key,
enter it here. If you do not know the
network security key then please
refer to Appendix "How to Find Your
Network Security Key" for guidance.
Click "Next" to continue when
finished.
5. You will see a final confirmation
screen, listing the settings you have
selected. If everything is correct,
click "Set" to continue.
17