Iii-2. Basic Settings - Edimax EW-7416APn v2 User Manual

LAN Configuration
IP Address
Subnet Mask
Default Gateway
MAC Address
III-2. Basic Settings
AP
Station-Infrastructure
AP Bridge-Point to Point
AP Bridge-Point to
Multi-Point
Displays the IP address of the access point.
Displays the subnet mask of the IP address.
Displays the IP address of the default gateway.
Displays the MAC address of the Access Point.
"Basic Settings" allows you to set the access point to any of
several different modes and configure the settings
accordingly.
Open the drop down menu labeled "Mode" and select from
the 6 available modes:
The available modes are:
The device acts as a wireless "access point" to a
wired Ethernet network. Wireless clients can
connect to this device and exchange data with
devices connected to the wired network.
Also known as wireless client mode. Enables
Ethernet-only devices such as smart TVs and game
consoles to connect to a wireless network.
Establishes a wireless connection with another
wireless access point using the same mode, and
links any wired networks connected to these two
wireless access points together. Only one access
point can be connected in this mode.
Establishes a wireless connection with other
wireless access points using the same mode, and
links any wired networks connected to these
wireless access points together. Up to 4 access
27