III-5-1.
Disable
When you select "Disable", wireless encryption for the network is disabled.
This means anyone who knows the device's SSID can connect to it, and is not
recommended.
Enable 802.1x
Authentication
Click "APPLY" to save changes. The following message will appear:
Click "CONTINUE" to save the changes and continue configuring other settings,
or click "APPLY" to restart the system and make the changes take effect.
III-5-2.
Enable 802.1x Authentication
If you select "Disable" or "WEP" as your encryption type, you can check the
"Enable 802.1x Authentication" box to enable 802.1x authentication based on
a RADIUS user authentication server.
Use internal
MD5/PEAP RADIUS
Server
Enable 802.1x
Authentication
RADIUS Server IP
Address
Check this box to enable 802.1x user authentication.
See
III-5-2. 802.1x Authentication.
Check the box to use an internal MD5/PEAP RADIUS
Server.
Enable or disable the use of 802.1x user authentication.
Enter the IP address of the RADIUS authentication
server here.
42