Sbecfg.exe; Sbemixer.exe - Creative SoundBlaster Live! 5.1 User Manual

06'26 0RGH 8WLOLWLHV
6%(&)*(;(
6%(0,;(5(;(
The Sound Blaster Live! card includes a few MS-DOS utilities. These utilities require the Sound Blaster
Live! DOS driver
SBEINIT.COM
Use the utility to obtain the hardware settings and the status of the Sound Blaster Live!

SBECFG.EXE

card. Typing at the command prompt displays the following hardware settings:
SBECFG.EXE
❑ PCI Hardware Settings: Port, IRQ
❑ Sound Blaster Emulation: Port, IRQ, DMA
MPU-401 Emulation (GM, Roland MT-32/LAPC-1): Port
❑
Adlib Emulation: Port
❑
Use to change the volume levels of the MPU-401 instrument set used on the Sound

SBEMIXER.EXE

Blaster Live! card. You can use
who want to set up batch files with particular volume levels—or within the
settings for are independent of the Creative Mixer settings in Windows 95/98.
SBEMIXER.EXE
To set SBEMIXER values in the command line:
At the DOS prompt, type the
SBEMIXER [/S:x] [/W:x] [/C:x] [/M:x] [/?]
Square brackets [ ] denote optional parameters.
Parameter Specifies
/S:x Synth volume. x can be a value from the range 0 to 127.
/W:x Wave volume. x can be a value from the range 0 to 127.
/C:x CD audio volume. x can be a value from the range 0 to 127.
/M:x Synth MT-32/LAPC-1 mode. For x, 0 is Off, 1 is On.
/? View a short description of the parameters.
For example:
SBEMIXER /S:64 /W:120 /C:50 /M:0
To set values within the Mixer screen:
SBEMIXER
• At the DOS prompt, type SBEMIXER
In interactive editor mode, you can change mixer settings with the mouse, TAB, PGUP, PGDN, or arrow
keys.
Use the Save button to save the settings for the next session.
to be loaded.
from the command line—useful for advanced users
SBEMIXER.EXE
command in a single line:
SBEMIXER
screen. The
SBEMIXER
Troubleshooting 29