Wps Wizard For Wifi Connections - NETGEAR AC1200 JR6100 User Manual


To reserve an IP address:
1. Select ADVANCED > Setup > LAN Setup.
2. In the Address Reservation section of the screen, click the Add button.
3. In the IP Address field, type the IP address to assign to the computer or server.
Choose an IP address from the router's LAN subnet, such as 192.168.1.x.
4. Type the MAC address of the computer or server.
Tip: If the computer is already on your network, you can copy its MAC
address from the Attached Devices screen and paste it here.
5. Click the Apply button.
The reserved address is entered into the table.
The reserved address is not assigned until the next time the computer contacts the router's
DHCP server. Reboot the computer, or access its IP configuration and force a DHCP release
and renew.

WPS Wizard for WiFi Connections

The WPS Wizard helps you add a wireless computer or device to your WiFi network. On the
computer or wireless device, either press its WPS button or locate its WPS PIN.

To use the WPS Wizard:
1. Select ADVANCED > WPS Wizard.
2. Click the Next button.
The following screen lets you select the method for adding the WPS client (a wireless
device or computer).
3. Select the radio button for the setup method that you want to use.
• Push button. Either click the WPS button on this screen, or press the WPS button on
the side of the router. Within two minutes, go to the wireless client and press its WPS
button to join the network without entering a password.
AC1200 WiFi Router JR6100
Advanced Home Settings
38