Specify Logs Settings - NETGEAR AC1200 JR6100 User Manual

Note: It might be illegal to use the wireless features of the router in some
parts of the world.
• Channel. The operating channel of the wireless port being used. The default channel is
Auto. When Auto is selected, the router finds the best operating channel available.
Note: Channels 1, 6, and 11 do not interfere with each other. Other
channels might interfere with other routers that are nearby.
• Mode. The wireless communication mode: For 2.4 GHz, Up to 54 Mbps, Up to 145 Mbps
(default), or Up to 300 Mbps. For 5 GHz, Up to 192 Mbps, Up to 400 Mbps, or Up to 867
Mbps (default).
• Wireless AP. Indicates whether the radio feature of the router is enabled. If this feature is
not enabled, the WiFi LED on the front panel is off.
• Broadcast Name. Indicates whether the router is broadcasting its SSID.
• Wireless Isolation. Wireless isolation prevents wireless clients from communicating with
each other when they join the wireless network.
• Wi-Fi Protected Setup. Indicates whether WPS is configured for this network.

Specify Logs Settings

A log is a detailed record of the websites that users on your network have accessed or
attempted to access. If you have set up content filtering on the Block Sites screen, the Logs
screen shows you when someone on your network tried to access a blocked site. If you have
email notification on, you receive these logs in an email message. If you do not have email
notification set up, you can view the logs here.
AC1200 WiFi Router JR6100
Administration
79