Use The Wps Wizard For Wifi Connections - NETGEAR RAX15 User Manual

5. Select the radio button next to the reserved address that you want to delete.
6. Click the Delete button.
The address is removed.

Use the WPS Wizard for WiFi connections

The WPS Wizard helps you connect WPS-enabled devices to your WiFi network without
typing the WiFi password.
You can use the WPS Wizard or you can use the physical WPS button on your router to
connect WPS-enabled devices. To use the physical WPS button on your router, see
Connect to the WiFi network using WPS on page 17 for more information.
To use the WPS Wizard to connect to the WiFi network:
1. Launch a web browser from a computer or mobile device that is connected to the
router network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > WPS Wizard.
The Add WPS Client page displays.
5. Click the Next button.
The page displays instructions about how to connect using WPS.
6. Click the WPS button that displays on the page.
Note: To use the physical WPS push button on the router, see Connect to the WiFi
network using WPS on page 17 and follow the instructions in that section.
7. Within two minutes, on your WPS-enabled device, press its WPS button or follow
its instructions for how to connect using WPS.
A success page displays if your WPS-enabled device successfully connects to the
WiFi network.
Manage Network Settings
4-Stream AX1800 WiFi 6 Router Model RAX15
63 User Manual