The status then changes to Available.
For each computer, after you click the Connect and Disconnect buttons once, the utility
automatically handles the printing queue. The status of the printer displays as Available
on all the computers.
•
When the status is Available, you can use the USB printer.
•
When the status is Manually connected by xxx, only the xxx computer can use the
printer. Other network devices must wait until the xxx computer has released the
connection, or until the connection times out (the default time-out value is 30
seconds).
•
You can set the value for the default time-out time from the Control Center -
Configuration screen.
AC1200 WiFi Router JR6100
USB Storage
60