2.
Select BASIC > Wireless Settings and verify that the wireless settings match the base unit
exactly.
The wireless security option must be set to WEP or None.
3.
Select ADVANCED > Wireless Repeating Function.
4.
Select the Enable Wireless Repeating Function check box.
5.
Select the Wireless Repeater radio button.
6.
Fill in the Repeater IP Address field.
This IP address must be in the same subnet as the base station, but different from the
LAN IP address of the base station.
7.
To prevent wireless clients from associating with the repeater and allowing LAN client
associations only, select the Disable Wireless Client Association check box.
If you prefer wireless clients to be able to associate with the repeater, leave the check box
cleared.
8.
In the Base Station MAC Address field, enter the MAC addresses for the access point that
should function as the base station.
9.
Click the Apply button.
Your changes are saved.
10.
Verify connectivity across the LANs.
A computer on any wireless or wired LAN segment of the router can connect to the
Internet or share files and printers with any other computer or server connected to the
other access point.
AC1200 WiFi Router JR6100
Advanced Settings
94