Ipv6 Auto Config - NETGEAR AC1200 JR6100 User Manual

3. Specify how the router assigns IPv6 addresses to the devices on your home network (the
LAN) by selecting one of the following radio buttons:
• Use DHCP Server. This method passes more information to LAN devices, but some
IPv6 systems might not support the DHCv6 client function.
• Auto Config. The default setting.
4. (Optional) Select the Use This Interface ID check box, and specify the interface ID that you
want to be used for the IPv6 address of the router's LAN interface.
If you do not specify an ID here, the router generates one automatically from its MAC
address.
5. For secure IPv6 filtering, select the Secured radio button.
6. For open IPv6 filtering, select the Open radio button.
7. Click the Apply button.

IPv6 Auto Config


To set up an IPv6 Internet connection through auto configuration:
1. Select ADVANCED > Advanced Setup > IPv6.
The IPv6 screen displays.
2. In the Internet Connection Type list, select Auto Config.
The screen adjusts:
The router automatically detects the information in the Router's IPv6 Address on LAN
field. This field shows the IPv6 address that is acquired for the router's LAN interface. The
number after the slash (/) is the length of the prefix, which is also indicated by the
underline (_) under the IPv6 address. If no address is acquired, the field displays Not
Available.
3. (Optional) In the DHCP User Class (If Required) field, enter a host name.
AC1200 WiFi Router JR6100
Advanced Settings
102