Chapter 27 Troubleshooting Hardware Components; Troubleshooting With The Cli On The Srx3400 Services Gateway - Juniper SRX3400 Hardware Manual

CHAPTER 27
Troubleshooting Hardware Components

Troubleshooting with the CLI on the SRX3400 Services Gateway

Related
Documentation
Copyright © 2013, Juniper Networks, Inc.
Troubleshooting with the CLI on the SRX3400 Services Gateway on page 219
Troubleshooting with LEDs on the SRX3400 Services Gateway on page 220
Troubleshooting with Chassis and Interface Alarm Messages on the SRX3400 Services
Gateway on page 220
Troubleshooting the Cooling System on the SRX3400 Services Gateway on page 221
Troubleshooting IOCs and NP-IOCs on the SRX3400 Services Gateway on page 222
Troubleshooting NPCs on the SRX3400 Services Gateway on page 224
Troubleshooting SPCs on the SRX3400 Services Gateway on page 224
Troubleshooting the Power System on the SRX3400 Services Gateway on page 225
The Junos OS command-line interface (CLI) is the primary tool for controlling and
troubleshooting services gateway hardware, Junos OS, routing protocols, and network
connectivity. CLI commands display information from routing tables, information specific
to routing protocols, and information about network connectivity derived from the
traceroute and traceroute utilities.
CLI commands are entered on one or more external management devices. These devices
are connected to the services gateway through the
You can use the CLI to display details about alarms generated by interfaces and hardware
components.
For information about using the CLI to troubleshoot Junos OS, see the appropriate Junos
OS configuration guide.
SRX3400 Services Gateway Switch Fabric Board on page 26
Troubleshooting with Chassis and Interface Alarm Messages on the SRX3400 Services
Gateway on page 220
Troubleshooting with LEDs on the SRX3400 Services Gateway on page 220
port on the SFB.
RE CONSOLE 0
219