HP EliteBook 820 G1 Quickspecs page 35

QuickSpecs
Technical Specifications
HP Fingerprint Reader
(optional)
Smart Card Reader
Mobile Voltage Operation 3.0V-3.6V
Operating Temperature
Current Consumption
Image
Low Latency Wait for
Finger
Capture Rate
ESD Resistance
Detection Matrix
Smart card standard
Dimensions (L x W x H)
Smart Card support
Smart Card Interface
Operating systems
Power
Features
DA - 14687 Worldwide — Version 8 — November 20, 2013
14° - 167°F (-10° - 75°C)
36 mA peak
950 uA
3000. lines/sec
IEC 61000-4-2 4B (±15KV)
200*1 (plus another secondary line)
508 dpi
12*3 mm sensor area
PC/SC 2.0 for Windows smart card standard
0.41x 0.08 x 0.32 in (10.5 x 2 x 8.2 mm)
ISO 7816 Class A and AB smart cards
Smart Card Interface with T = 0 and T = 1 support
Support I2C memory card, SLE4418, SLE4428, SLE4432, SLE4442, SLE4436,
SLE5536, SLE6636, AT88SC1608, AT45D041 card and AT45DB041 card via
external EEPROM
No driver is required for this device. Native support is provided by the
operating system.
Normal Mode
Power Saving
Mode
Support single slot
Support T0, T1 protocol
Support I2C memory card, SLE4418, SLE4428, SLE4432, SLE4442,
SLE4436,
SLE5536, SLE6636, AT88SC1608, AT45D041 card and AT45DB041 card
via external EEPROM
Support ISO7816 Class A, B and C (5V/3V/1.8V) card
Implemented as an USB full speed device with bulk transfer endpoint,
Mass
Storage endpoint
Built-in PLL for USB and Smart Card clocks requirement
Support EEPROM for USB descriptors customization (PID/VID/
HP EliteBook 820 G1 Notebook PC
HP EliteBook 840 G1 Notebook PC
HP EliteBook 850 G1 Notebook PC
With card present, before being suspended: 40.9
mA
Without card present, before being suspended:
33.16 mA
After being suspended with smart card present:
380 µA
After being suspended without smart card
present: 380 µA
With card present, before being suspended: 40.6
mA
Without card present: 380 µA
After being suspended with smart card present:
380 µA
Page 35