Broiler Pan And Rack; Control Panel - GE JTP10GS Use And Care Manual

Proper care and cleaning are important so your oven will give you efficient
and satisfactory service. Follow these directions carkfully in caring for your
oven to assure safe and proper maintenance.
Oven Shelves
Clean the oven shelves with a mild abrasive cleanse~.
After cleaning, rinse the shelves with clean water ~d
dry with a clean cloth.
heavy, burned-on soil,
may be used. After scrubbing, wash with soapy wat~r,
rinse and dry.
The oven shelves may be cleaned in the self-cleanin$
oven. However, they will darken, lose their luster and
become hard to slide. Wipe the shelf supports with ~
cooking oil after self-cleaning to make shelves slide
more easily.

Broiler Pan and Rack

remove the broiler pan and rack froh
After broiling,
the oven. Remove the rack from the pan. Carefully ~
pour out the grease in the pan into a proper containe~.
Wash and rinse the pan and rack in hot, soapy water.
sprinkle the rack while hot ~
If food has burned on,
with detergent and cover with wet paper towels or a ~
dish cloth. Burned-on foods will soak loose while the
meal is being served. Wash, scour if necessary with ~
soap-filled or plastic scouring pad. Rinse well and diy.
Oven Light
Before replacing the light bulb,
disconnect the power to the oven.
To replace the oven light:
Be sure the bulb is cool. Do not
touch a hot bulb with a damp cloth,
as the bulb may break. Use a dry
potholder, to prevent possible harm
to hands, and very carefully
unscrew the bulb cover and bulb.

Control Panel

It is a good idea to wipe the control panel after each ~
use of the oven. Clean with mild soap and water or ~
vinegar and water, rinse with clean water and polish ~
dry with a soft cloth.
20
soapy metal pads.
Replace wi~h a 40 watt appliance
bulb.
reconnect the power to the oven.
NOTE: Yo~ will need to reset the
clock.
Do not store a soiled broiler pan and rack in the oven.
Do not clean in the self-cleaning oven.
The broiler pan and rack may also be cleaned in
the dishwasher.
Do not use abrasive cleansers, strong liquid cleaners,
plastic scouring pads or oven cleansers on the control
panel—they will damage the finish. A 50/50 solution
of vinegar and hot water works well.