GE JTP10GS Use And Care Manual page 6

FEATURES OF YOUR OWN CONTROL
CLOCK CLEAN
1. TIMER or TIMER ON/OFF. Press this pad to
select the timer function. The timer does not
control oven operations. The timer can time up to
9 hours and 55 minutes.
To set the timer, first press TIMER or TIMER
ON/OFF pad. Then press the INCREASE or
DECREASE pad to change the time.
To cancel the timer, press and hold the
TIMER ON/OFF pad.
2. this pad to cancel all
oven operations except clock and timer.
3. PROGRAM STATUS. Words light up in the
display to indicate what is in time display.
Programmed information can be displayed at
any time by pressing the pad of the operation you
want to see. For example, you can display the
current time of day while the timer is counting
down by pressing the CLOCK pad.
4. TIME DISPLAY. Shows the time of day, the
times set for the timer or automatic oven operation.
5. OVEN TEMPERATURE AND BROIL
DISPLAY. Shows the oven temperature or the
broil setting selected.
6. FUNCTION INDICATORS. Light up to show
whether oven is in bake, broil or self-clean mode.
7. INCREASE. Short taps to this pad increase time or
temperature by small amounts. Press and hold pad
to increase time or temperature by larger amounts.
8. BAKE. Press this pad to select the bake function.
9. COOK TIME. Press this pad for Timed Bake
operations.
6
10.
CLOCK. To set the clock, first press the CLOCK
pad. Then press the INCREASE-or DECREASE
pad to change the time of day. Press the CLOCK
pad to start.
11. CLEAN. Press this pad to select self-cleaning
function. See the Operating the Self-Cleaning
Oven section.
12. DECREASE. Short taps to this pad decrease
time or temperature by small amounts. Press and
hold pad to decrease time or temperature by
larger amounts.
13. BROIL. Press this pad to select the broil function.
14. STOP TIME. Use this pad along with
COOK TIME or CLEAN to set the oven to
stop automatically at a time you select.
control beeps, this indicates function error
code. If function error code appears during the
self-cleaning function, check the oven door
latch—the latch handle may have been moved,
even if only slightly, from the latched position.
Make
sure the handle is to the right as far as it will
go. Press the CLEAWOFF pad. Allow the oven to
cool for 1 hour. If function error code repeats,
disconnect power to the range and call for service.
COOK
BAKE
TIME
STOP
BROIL
TIME
—
,