Caller Id Solutions - GE InfoLink 28320xx2 User Manual

Unit beeps
• Clean charging contacts on cordless handset.
• See solutions for No dial tone.
• Replace the battery.
Memory Dialing doesn't work
• Did you program correctly?
• Did you follow proper dialing sequence?
Handset displays SEARCHING or NOT REGISTERED and cannot link up with the base
when the TALK/CALL BACK button is pressed.
• Handset may be out of range of the base. Move closer to the base.
• Make sure the power adaptor is properly installed.
• Disconnect the handset battery and plug it in again. Place the handset on the
cradle for at least 2 to 3 minutes.
• Disconnect the power adaptor and plug it in again. Then place the handset on the
cradle for at least 2 to 3 minutes.
Handset displays NOT REGISTERED
• Follow the programming in the telephone procedures to re-register the handset to
the base.
• Press the SELECT button to begin handset registration. Follow instructions on
Handset screen.
Registration did not work
• Charge the batteries for 16 hours.
• Uplug and then plug in the power adaptor.

Caller ID Solutions

No Display
• Charge or replace the batteries.
• Make sure that the unit is connected to a non-switched electrical outlet. Disconnect
the AC power adaptor from the base and reconnect it.
Other Information