Table of Contents
Advertisement
'EXISTED'. If try to save some call logs without number, it will show 'INVALID'.
If the current call log entry does not match phone book and it has no name, the name field will be
filled with 'CID NAME'.
To delete all call log (including unread type), user can select 'DELETE ALL' in the call log menu.
Further confirmation is necessary before the operation.
Saving the caller's number is only possible if a matched entry is not found in the phone book.
Dial back on call log
To operate the caller ID number from call log, choose 'CALL LOG' to enter the call log first.
During viewing any type of call log, press [0-9] to add digits before CID number. Press [#] to cancel
all additive digits.
If number of digits is more than 6, always allow to press # to truncate the leftmost digit of the CID.
If number of digits is less than 16, always allow to press 0 - 9 to insert digits 0 - 9 correspondingly to
the left of the 1st digit of the CID.
Insert follow truncate shall copy original cid record to the display. Truncate follow insert is allowed.
The amended CID do not save in the CID log, and press CID up or down button to recover to the
original stored CID number .
7 Technical Specifications
Open Field Range*:
Indoor Range*:
Handset
Operating
values**)
Handset Weight:
AC/DC Adapter:
AC/DC Adapter: (for Handset charging)
Rechargeable Battery:
Operating Temperature:
*
Value may vary according to environment.
** For guidance only, depends on initial battery charge.
8 Troubleshooting Tips
Caller ID Solutions
No Display
Is battery fully charged? Charge the battery for 12 hours or replace the battery. Make sure the battery
is properly installed and connected.
Typical 300m
Typical 50m
Time:
(average
Approx.
Approx.
Approx. 115g
Switching mode / VDE / Dual Input :
DSA-5P-05 FEU 060035 / 3515-0635-ADC / D060035DU
Input: 100-240V AC, 50/60Hz / 230 V AC, 50Hz / 110/220
V AC, 50/60 Hz
Output: 6 V AC, 350mA
Switching mode / VDE / Dual Input :
DSA-5P-05 FEU 060015 / VD060015D / D060015DU
Input: 100-240V AC, 50/60Hz / 230V AC, 50Hz / 110/220
V AC, 50/60 Hz
Output: 6 V AC, 150mA
SN-AAA60HJ
0 to 45 °C
6
hours talk time
70
hours standby
or equivalent (Ni-MH, 1.2V, 600mAh)
26
Advertisement
Table of Contents
