Connect Your Push2Tv Adapter To The Tv - NETGEAR PTV3000 User Manual

Connect Your Push2TV Adapter to the TV

Note: To connect your Push2TV adapter to your TV, you need an HDMI
cable, which is sold separately from the Push2TV adapter.
USB cable
Figure 2. Push2TV adapter cable connections

To connect your Push2TV adapter:
1. Connect one end of the USB power cable to the USB power port on the rear panel of
the Push2TV adapter.
2. Connect the other end of the USB power cable either to a USB port on the TV or to the
power adapter.
3. (Optional) If you use the power adapter, plug the power adapter into an electrical outlet.
The white LED on the front panel lights and remains lit during normal operation.
You can skip this step if you connect the USB power cable to a USB port on the TV.
4. Connect one end of the HDMI cable to the HDMI port on the rear panel of the Push2TV
adapter.
5. Connect the other end of the HDMI cable to the HDMI port on the TV.
Note: Make sure that the cables are pushed all the way into their correct
input positions.
Push2TV Wireless Display Adapter PTV3000
HDMI cable
Power adapter
Set Up the Push2TV Adapter
7